BL Touch v3.1 Error on Mini SKR E3 v1.2

Home › Forums › bigtree-tech › BL Touch v3.1 Error on Mini SKR E3 v1.2

Viewing 1 post (of 1 total)
  • Author
    Posts
  • January 21, 2021 at 2:03 pm #144
    matts
    Participant

    Hi,

    I am having issues getting the BL touch to work on my mini SKR e3 v1.2
    I have tried both connecting to the probe and to the Z axis. Both fail when doing bed leveling.

    It will randomly stop while probing the first row and the probe will extend and retract about 3 times, then the Z axis will raise up a few mm and it will stop.

    I have tried both firmware from bigtree github with no success.
    I have replaced my BL touch. I have triple checked the connections and even change the connector on the 2 pin connector for BL touch.

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.