TFT to motherboard wiring

Home Forums bigtree-tech TFT to motherboard wiring

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #184
    thesamurai
    Participant

    I note that the pinouts for the TFT35 E3 V3.0 and the pinouts for the SKR E3 Turbo motherboard’s TFT pins show TX and RX in the same exact position. Normally, I would think that TX on one device should be connected to RX on the other end. And then RX on the first device should be connected to TX on the second device. However, the pinout diagrams show TX and RX in the same positions and the cable provide has straight-through connections (no cross-wiring).

    Is it OK to connect TX to TX and RX to RX?

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.