z axis does not move during printing

Home Forums bigtree-tech z axis does not move during printing

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #76
    Anonymous
    Inactive

    Hello, I exchanged the original Creality plate for BTT SKR Mini E3 v2.0, with original firmware that came, however when printing the Z axis it does not go up in the layer change, using the controls on the LCD the Z axis moves normally, I have already tested changing the engine, changing the connection on the board between ZAM and ZBM and the same problem occurs, you could send me another firmware.bin file so you can test it, my Ender 3 Pro has no modifications, it is a Creality standard, I tested the firmware GitHub (https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/firmware/V2.0) and the problem persists

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.